| |
|
|
Машина за моделиране на моделажен восък Roland JWX-30
|
|
| |
| Перфектно решение за всеки бижутер. Новата ювелирна машина от Roland постига сложни и завършено гладки повърхности на всеки 3D модел със изключителна прецизност – с включен интуитивен за работа софтуер -Roland JewelStudio. |
Технически данни
| Cuttable material |
Modeling wax |
| X,Y,and Z operation strokes |
X, Y, and Z: 305 x 205 x 100 mm (12 x 8.1 x 3.9 in.) |
| Connectivity |
USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Power requirements |
|
| Voltage and frequency |
AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1) |
| Required power capacity |
2.8 A (100 to 120 V)/1.2 A (220 to 240 V) |
| Power consumption |
275 W |
| Dimensions |
Width x depth x height: 606 x 656 x 557 mm (23.9 x 25.9 x 22 in.) |
| Weight |
47 kg (104 lb) |
| Environmental |
Operating environment: Temperature of 5 to 40°C (41 to 104 °F), 35 to 80% relative
humidity (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1) |
| Accessories |
Power cord, Handy panel, Tools for modeling (ball end mill, diameter 3.175mm /conical end mill, diameter 3.175 mm), collet (diameter 3.175 mm), detection pin, hexagonal screwdriver, hexagonal wrench, cap screws (10), spanner (10 mm, 17mm), modeling wax, clamp holder, square clamp (large), square clamp (small), swivel clamp, tube clamp, dust tray, blower fan, User’s Manual, SRP Player Installation and Setup Guide, SRP Player CD-ROM, Roland Software Package CD-ROM, Roland JewelStudio DVD-ROM |
Последна редакция: 2009-04-21 17:19:30 |
|
|
