| |
|
|
Настолна гравираща машина Roland EGX-350
|
|
| |
| Гравираща машина за изработка както на малки и големи табели и персонализирани сувенирни изделия, така и на висококачествени релефни изображения и модели (шаблони, клишета) върху метал, дърво, плексиглас и др. |
Технически данни
| Model |
EGX-350 |
Table size
|
305 (W) x 230 (D) mm [12 (W) x 9.1 (D) in.] |
XYZ-axis travels
|
305 (X) x 230 (Y) x 40 (Z) mm [12 (X) x 9.1 (Y) x 1.6 (Z) in.] |
XYZ-axis drive system
|
Stepping motor, 3-axis simultaneous control |
Operating speed
|
X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec),
Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec) |
Software resolution
|
0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step) |
Mechanical resolution
|
X and Y axes: 0.0025 mm/step (0.0001 in./step),
Z axis: 0.00125 mm/step (0.0005 in./step) |
Spindle motor
|
Brushless DC motor, maximum 50 W |
Spindle speed
|
5,000 to 20,000 rpm |
Tool chuck
|
Cutter holder, collet method |
Loadable workpiece thickness
|
Maximum 40 mm (1.6 in.) or 38 mm (1.5 in.) when nose unit is used |
Connectivity
|
USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant) |
| Control command set |
RML-1 |
Power requirements
|
AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II,
IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1) |
Power consumption
|
122 W |
| Acoustic noise level |
During operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779) |
| Dimensions |
616 (W) x 591 (D) x 393 (H) mm [24.3 (W) x 23.3 (D) x 15.5 (H) in.] |
Weight
|
34 kg (75 lb.) |
| Environmental |
Temperature: 5 to 40°C (41 to 104°F),
Humidity: 35 to 80 % (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1) |
| Accessories |
Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software CD-ROM, Roland EngraveStudio™ CD-ROM, Roland Software Program Guide, Roland EngraveStudio™ Program Guide, and User's Manual |
Последна редакция: 2009-04-21 16:04:54 |
|
|
