This is a summary of selected HDP5000 specifications.
Printing technology:
- HDP® dye-sublimation / resin thermal transfer
Resolution:
Colors:
- Up to 16.7 million / 256 shades/pixel
Print speed:
Batch Mode:
• 26 seconds per card / 138 cards per hour (YMC with transfer)*
• 32 seconds per card / 113 cards per hour (YMCK with transfer)*
• 47 seconds per card / 77 cards per hour (YMCKK with transfer)*
• 37 seconds per card / 97 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
• 55 seconds per card / 65 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)*
Accepted standard card sizes:
- CR-80 (3.370”L x 2.125”W / 85.6mmL x 54mmW)
Print area:
- Over-the-edge on CR-80 cards
Input card cartridge capacity: - 100 cards (.030" / .762mm thick)
Output hopper card capacity:
- 200 cards (.030" / .762mm thick)
Encoding Options:
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
• Contactless Smart Card Encoder (HID iCLASS and MIFARE)
• Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards
• Prox Card Reader (HID read-only)
Options:
• Card Lamination Module – single-sided or dual-sided (simultaneous)*** • Magnetic stripe encoding • 200-card input hopper • Smart card encoding (contact/contactless) • Dual-sided printing
• Door and cartridge locks • Printer cleaning kit
