| Model | GX-500 | GX-400 | GX-300 |
| Mechanism / Driving method | Friction feed / Digital control servo motor |
| Maximum cutting area | Width: 1195 mm (47 in.)
Length: 24998 mm (984-1/8 in.) | Width: 1000 mm (39 in.)
Length: 24998 mm (984-1/8 in.) | Width: 737 mm (29 in.)
Length: 24998 mm (984-1/8 in.) |
| Acceptable media widths | Min. 90 mm (3-1/2 in.)
Max. 1372 mm (54 in.) | Min. 90 mm (3-1/2 in.)
Max. 1178 mm (46 in.) | Min. 50 mm (2 in.)/Max. 915 mm (36 in.)
(50 to 540 mm (2 in. to 21 in.),
582 to 915 mm (23 in. to 36 in.)) |
| Width of material that can be cut off | 0 to 1270 mm (0 in. to 50 in.) | 0 to 1067 mm (0 in. to 42 in.) | 0 to 812 mm (0 in. to 32 in.) |
| Tools | Special blade for CAMM-1 series |
| Maximum cutting speed | During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45 direction) |
| Cutting speed / Blade force | 10 to 850 mm/sec. (in increments of 10 mm/sec.) / 20 to 350 gf |
| Mechanical resolution | 0.0125 mm/step (0.000492 in./step) |
| Software resolution | 0.025 mm/step (0.000984 in./step) |
| Distance accuracy (*1) | Error of less than ± 0.2% of distance traveled, or 0.1 mm (0.00394 in.), whichever is greater |
| Repetition accuracy (*1) (*2) (*3) | 0.1 mm or less |
| Interface | Serial (RS-232C-compatible), USB (Rev 1.1) |
| Replot memory | 2 MB (buffer size: 8 MB) |
| Power supply / Power consumption | AC 100V to 240V ± 10% 50/60 Hz 1.2A / Approx. 100W | AC 100V to 240V ±10% 50/60 Hz 1.1A / Approx. 95W |
| Dimensions with stand | 1602 mm (W) x 727 mm (D) x 1113 mm (H)
(63-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H)) | 1407 mm (W) x 727 mm (D) x 1113 mm (H)
(55-3/8 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H)) | 1144 mm (W) x 727 mm (D) x 1113 mm (H)
(45-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H)) |
| Weight with stand | 55 kg (121.2 lb.) | 51 kg (112.4 lb.) | 44 kg (97 lb.) |
| Included items | Power cord, blade holder (XD-CH2), pin, blade, alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user's manual |
