| Specification | DWX-30 |
| Cuttable material | Zirconia, modeling wax |
Loadable workpiece shape | Cylindrical (Without Levels) | External diameter: 98mm, Height: 10 – 14mm |
| External diameter: 100mm, Height: 10 – 14mm |
| Cylindrical (With Levels) | External diameter (level section): 98mm, External diameter (body section): 95mm, Height: 12 – 26mm External diameter (level section): 100mm, External diameter (body section): 95mm, Height: 12 – 26mm |
| Block | Width x Depth: 40 x 75mm, Height: 12 – 26mm |
| Loadable workpiece | 1.4kg |
| Maximum angle of rotation | ±18×105° (±5000 rotations) |
| X, Y, and Z operation stokes | X, Y, and Z: 239 x 205 x 100 mm (9.4 x 8.1 x 3.9 in.) |
| X-, Y-, and Z-axis drive system | Stepper motor |
| Operating speed | X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec.)
Z axis: 0.1to 30 mm/sec. (0.004 to 1.2 in./sec.)
A axis: 11.25rpm |
| Software resolution | X, Y and Z axis: 0.01mm/step (0.0004 in./step), A axis: 0.0225° |
| Mechanical resolution | X and Y axis: 0.00125 mm/step (0.00005in./step) (micro-step control)
Z axis: 0.00125 mm/step (0.00005in./step) (micro-step control)
A axis: 0.0028125° (micro-step control) |
| Spindle motor | Brushless DC motor, maximum 100W |
| Spindle speed | 6,000 to 30,000 rpm |
| Tool chuck | Collet method |
| Interface | USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Control command set | RML-1 |
| Required power supply amperage | Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1)
Required power capacity: 2.8 A (100 to 120 V)/ 1.2 A (220 to 240 V) |
| Power consumption | 275 W |
| Operating noise | During operation: 60 dB (A) or less (when not cutting), during standby: 40 dB
(A) or less |
| External dimensions | Width x Depth x Height: 606 x 656 x 557 mm (23.9 x 25.9 x 22 in.) |
| Weight | 47 kg (104 lb) |
| Installation Environment | Operating environment: Temperature of 5 to 40°C (41 to 104 °F), 35 to 80% relative humidity (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1) |
| Included items | Power cord, handy panel, collet (diameter 3.175 mm, 4.0 mm), detection pin,
cap*, spacer (A, B)*, Clamp for block workpiece (C-1, C-2, D-1, D-2), hexagonal
screwdriver, hexagonal wrench, spanner (10 mm, 17mm), dust tray, USB cable,
User’s Manual (this document), Roland Software Package CD-ROM |
| |
| COMPUTER REQUIREMENTS |
|---|
| Operating system | Windows XP/Vista (32 bit edition) |
| CPU | The minimum required CPU for the operating system |
| Memory | The minimum amount of required RAM for the operating system |
| Optical drive | CD-ROM drive |
| Video card and monitor | At least 256 colors with a resolution of 1,024 x 768 or more recommended) |
| |
| DUST COLLECTOR REQUIREMENTS |
|---|
| Air volume | 6m3/min (6000 L/min) |
| Static Pressure | 0.98kPa |
