FLEXA

Машини

Ламинатор Flexa EASY 210, 160 and 140

• Работна площ 2100, 1600 и 1400 мм.
• Разработен за ламиниране на двустранен и стандартен ламинат едновременно
• Подгряване на валовете съответно (30° - 40° - 50°C) стандартно за EASY 160 и 140 и опция за EASY 210
• Датчик за налягането опражнявано от валовете

FLEXA CUT DELUXE

• Vertical panel saw for horizontal and vertical cutting of rigid panels in general such as methacrylate, polycarbonate, PVC, wood, aluminium, etc. The useful dimensions of cut are of 6080, 5300, 4200, 3200 x 2200 mm with a maximum thickness of 60 mm.

Splitter 3000

• Panel saw for the vertical and horizontal cut of manifold types of panel in rapid and precise way. Expanded PVC, Metacrylate, Polycarbonate,wood, aluminum and many other will easily be cut using her various disposition blades. Maximum thickness is 30mm. It is also possible to perform millings on the material through the regulation of the thickness of cut.

Large Format Cutting Bench

• The combination and the stability of the BIG bench with the choice of Javelin or Max cutters creates the ultimate precision cutting table.
• The stability of the BIG bench with individual level adjustment on each leg provides a firm and flat work surface to ensure extreme accuracy and the integral Lift and Hold mechanism enables the largest work to be easily aligned and trimmed singlehanded.

Javelin and Max

• Javelin and Max are ingenious cutting solutions which offers a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. The unique design of Javelin and Max enables its straightness to be factory adjusted, using laser technology, to meet with today's very high standards for accurate butt joints on sectional panels and pop-up systems. Additional built in features of Javelin and Max have created an indispensable precision cutter that is safe for both product and people.

SABRE

• General Purpose Cutter
• Designed to cut a wide range of sheet materials, the Keencut Sabre offers a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge.

TESIS & TESIS-R 3300 e 5100

• Special TESIS & TESIS-R 3300 e 5100 for large format rolls

TGE 1600

• Would you like your stock of adhesive material to be simple and yet efficient and, at the same time, have rolls cut into a height that is appropriate for the operation you are performing?

SLITTER SLT800

• When you need to produce adhesive labels, it occurs very frequently that the cutting of the backing paper (easily detachable) performed by the PVC manifacturer does not match the size we need.

EXCALIBUR 1000

• It is a vertical panel cutter that cuts sheet materials easily, cleanly, and accurately, every time.